How to judge the standard of whether the standard color sorting machine!
Factors influencing the treatment capacity in addition to the configuration and structure described above color machine recognition system is different, there is one important factor is the general specifications, color sorting machine manufacturer's specification size to configure the channel to determine the number, color sorter specifications are generally 32, 48, 80, 96 and 128 channel range. At the same time, the amount of treatment is closely related to the proportion of the raw materials and the proportion of the impurities contained, as well as the required accuracy. Selected rate refers to the impurity amount selected from grain percentage of impurities in total, also called the precision of color separation. The main factors affecting the selection rate flow and color sorter model is to determine the performance, generally speaking, the adoption of CCD is higher than that of the silicon photocell, with better check structure on the radio structure.
The color sorter can not be installed in the low temperature, high temperature, humidity, dust, color sorter operation should be isolated from the rice mill and other equipment, to ensure good ventilation environment. Light (lighting equipment etc.) or no direct sunlight to the color sorter, otherwise it would be reduced ability to capture the signal of the photoelectric system, which is difficult to distinguish the information so as to reduce the particle color, color accuracy, increase with ratio, reduces the effect of color selection. Large Beige before the election, it should carry out polishing. The polished rice, bright white, good in appearance, no bran powder and other powder. If the rice contains powder, high moisture, long time, suitable temperature, easy to agglomerate in the channel flow, effects of rice, while sorting indoor high concentrations of dust will affect the electric eye recognition ability, reduce the sorting accuracy, reduce the service life of the color sorter.