The quartz sand color separator tells you that the glass or drum below is covered by mud, sand or dust and other sundries. The upper camera can't compare the color difference with the lower background plate. In this state, the color separator can't normally separate materials. It must stop production and clean up the sundries on the glass or drum. The cleaning time will be very frequent, and the effective production time will be reduced, which directly affects the output or color separation effect 。
Taiyiming quartz sand color sorter is equipped with embedded software, which greatly reduces the error. It is equipped with a 10.2-inch touch screen, easy to operate, and uses a high-performance CCD sensor (2048 pixels), which can select bad cameras at the same time. It is a high-performance color sorter with self-detection and automatic selection ability, minimizing the error. You can even choose small substances as small as 0.125mm. In the actual production process, these indicators are integrated, and there is a relationship of mutual influence and restriction, which must be examined at the same time.
The factors that affect the color separation accuracy and the processing capacity per unit time are mainly the movement speed of the servo system, the maximum speed of the conveyor belt and the purity of the raw materials. The height of the belt out ratio can be adjusted. If the belt out ratio is set too high, the selection rate and processing capacity will be affected. If the setting is too low, the normal materials in the selected waste will be too much, resulting in waste.
The unique physical and chemical properties of quartz sand make it play an important role in aviation, aerospace, electronics, machinery and today's rapid development of IT industry, especially its internal molecular chain structure, crystal shape and lattice change law, Because of its high temperature resistance, small coefficient of thermal expansion, high insulation, corrosion resistance, piezoelectric effect, resonance effect and its unique optical characteristics, it plays an increasingly important role in many high-tech products.
In the application of quartz products in the world, the semiconductor market takes the lead. Specifically, the market share of semiconductor, optical fiber, optics, photovoltaic and electric light sources is 65%, 14%, 10%, 7% and 4% respectively. Quartz market is a typical monopoly market, with the global Cr5 of about 70%.